Easy Guide On Furnace Maintenance This Fall

Fall is among the seasons of the year, if not the only one, that’s best for keeping your HVAC system in check. Of course, that highlights furnace maintenance because it’s mostly going to do most of the work in the colder months. If you live in an area with little snowfall, then you’re lucky because your furnace won’t be cranked up too often. Again, fall is the perfect time for maintaining HAVC systems and your furnace. Call your local HVAC contractor to have your system maintained. If not, here are some tips on how you could maintain your furnace yourself:

Always call a professional if you are not familiar with HVAC maintenance

1. Take out the combustion chamber door – this is the first step in the process of keeping your furnace in working order throughout the year. Removing the combustion chamber door is relatively easy and is normally held in place with just two screws. Do bear in mind that the number of screws might differ depending on the model that you have.

1. Check the burner flames – if you notice that there’s a yellow tinge in the flame, you should have your burner cleaned. A clean burner will have blue flames and nothing more. If you see any other problems, call your local HVAC contractor in North Myrtle Beach for assistance.

1. Vacuum the blower and burner cavities – there will be some dust and dirt in these cavities that need to be vacuumed. However, be cautious enough that no parts would be damaged. Use a thin hose when you vacuum as to not damage any nearby parts. For consistent heating and cooling performance, always keep your system as clean as possible.

1. Change the furnace filter – a replacement filter will be needed to ensure that the air is free from dust and debris. Always stick to the stock filter. In case you want to switch to more efficient filters, be sure to read the instruction manual for reference. Your HVAC contractor can tell you what type of filter is best used.

1. Clean the flame sensor – as you continue using your furnace, there will be residue that will settle on the flame sensor. Once this happens and the residue is thick enough, the furnace will not fire up. It’s important to keep the sensor clean at all times. However, if you find that the sensor is not working 100% even after cleaning, you might need to call your HVAC contractor to have it resolved before turning the furnace back on.

1. Check the drive belt – during lengthy operation periods, there is a possibility that the drive belt will show signs of wear. These signs will indicate whether or not a replacement is necessary. To be more accurate, refer to the instruction manual for reference. Or better yet, consult your HVAC contractor about the drive belt for better results.

1. Consider hiring a professional – in general, it’s not that easy to keep your furnace maintained. There are a lot of parts that need to be accounted for. If you miss one step in particular, it could leave possibilities for damage. That’s one thing that you don’t want to happen. It’s always best to leave the maintenance to the experts like NMB HVAC Pros. Doing so will protect your system and extend its longevity and years of service.

Call NMB HVAC Pros if you are looking for a credible HVAC repair company.

NMB HVAC Pros North Myrtle Beach, SC, 29582 843-353-4089 http://nmbhvacpros.com

http://nmbhvacpros.com/easy-guide-on-furnace-maintenance-this-fall/

Expert HVAC Tips – Comprehensive AC Inspection

Keeping your HVAC system in good condition doesn’t just involve the occasional swapping out of air filters and cleanup. There needs to be a comprehensive inspection. This, of course, encapsulates everything included in the system. This includes checking the ac unit if anything needs to be repaired or placed. After the inspection, you will be notified by the contractor if air conditioner repair is needed. But what it included in the inspection? What are the things that you need to know?

Always hire an HVAC contractor for the maintenance of your system

Having your system professionally maintained is the easiest way you can ensure that everything is working properly. Always remember that your HVAC system consists of a number of parts. This simply means that there’s more to the maintenance that you initially thought. To keep your system running all throughout the year, always hire an HVAC contractor in North Myrtle Beach for the maintenance to be certain. Here are all the items included in a comprehensive air conditioner inspection:

1. Checking the thermostat.
2. Cleaning the filter or replacement if necessary.
3. Checking air temperature between supply and return.
4. Inspecting the wiring and fuses.
5. Tightening all electrical connections.
6. Checking all contact points.
7. Checking the relays and pressure controls.
8. Checking electrical supply.
9. Inspecting for leaks.
10. Inspecting and cleaning the condenser coil.
11. Checking ductwork for leaks and consistency.
12. Check and clean the evaporator coils
13. Monitor refrigerant pressure
14. Testing fan blades
15. Checking the compressor and wirings

As you might see, there are a lot of things that go on during a comprehensive air conditioner inspection. If any of these items are left out, there’s a possibility that a problem could spring from that area. Although the chances are slim, there is still a possibility that the overlooked areas would be damaged. It’s for this reason that maintenance and inspection are done by a qualified HVAC contractor. Why is it necessary for an HVAC contractor to carry out the maintenance? In general, you would want to hire a professional HVAC contractor like NMB HVAC Pros to make sure that your system is running efficiently as possible. Of course, hiring a professional to maintain your system is basically ensuring that your system won’t have any problem of any sort. Other than that, professional air conditioner maintenance is a lot cheaper when you come to think of it. DIY solutions abound on the internet. However, none of these DIY maintenance tutorials really explain the value of having your system maintained by a professional. DIY is an option for everyone, however, not all people have the skills and knowledge to cover the maintenance required by HVAC systems. On the other hand, it’s only then that you attempt to do the maintenance yourself that you would realize it would have been better off with an HVAC contractor.

Call NMB HVAC Pros if you need expert help in installing, repairing, or maintaining your HVAC unit.

NMB HVAC Pros North Myrtle Beach, SC, 29582 843-353-4089 http://nmbhvacpros.com

http://nmbhvacpros.com/expert-hvac-tips-comprehensive-ac-inspection/

6 Common Reasons For Poor Duct Airflow

Have you noticed that there isn’t enough airflow running through your ducts recently? Did you know that poor airflow affects the overall efficiency of your system? When your system isn’t pushing as much air into the entire house, it works harder than its normal operating capacity. This means the system will eat up more electricity to provide the same cooling or heating. It’s best to have it checked out by an HVAC contractor to resolve the problem. However, there are things you can do at home to spot the problem and save the contractor some time in looking for the affected areas.

It can be tricky to repair duct problems which is why it is best left to an HVAC contractor

Closed or blocked vents – when there are things that are in front of the vents that directly block the flow of air, it creates a problem. The vents should never be closed. Things that could completely block the vents must also be placed elsewhere. Furniture or other things must be placed away from the vents to ensure proper airflow. It’s not something you call an HVAC contractor for but if you’re having the system professionally maintained, you can have them take a look at it as well. Closed damper valve – the damper valve is basically like vents that restrict or direct airflow into certain areas of the home. The damper valves could be adjusted manually so they are open to avoid restricting airflow if that is what you need. However, you can only make the adjustments yourself with a manual damper valve. For automatic damper valves, you don’t really have much of a choice than to call in a North Myrtle Beach HVAC contractor. Why? That’s because automatic damper valves are controlled by the thermostat. That means even if you manage to manually adjust the damper valves, they would return to the original position once the thermostat triggers them. Blocked or dirty ducts – the ductwork inside your home is what delivers air from one point to another. If somewhere in the ducts are blockages that normally results in poor airflow. Unfortunately, this isn’t a task that you can simply do on a weekend. This typically requires the attention of an HVAC contractor. Leaky ducts – when your ducts have leaks that usually means the system is working harder to maintain a comfortable environment inside the house. Leaks can be costly due to the fact that your electricity bill would rise. Other than that, leaks in your ducts invite more problems the longer the problem is overlooked. This is the reason why professional maintenance is recommended to ensure that when needed, HVAC repair can be done immediately. Buckled flex duct – the flex ducts are basically insulated ducts that run through the home. These are normally used on HVAC systems due to their insulated nature. However, when the core material buckles, the entire duct system is blocked, restricting airflow into different sections of the home. You will need to call an HVAC contractor to have it fixed. Restrictive air filters – air filters are integral parts of your ductwork. However, when they are clogged after filtering a lot of dust in the air, they can no longer let air through normally. This will be problematic for the system which must be replaced immediately. Hire professional contractors like NMB HVAC Pros to maintain and or repair your HVAC system.

Call NMB HVAC Pros if you are looking for a credible HVAC repair company.

NMB HVAC Pros North Myrtle Beach, SC, 29582 843-353-4089 http://nmbhvacpros.com

http://nmbhvacpros.com/6-common-reasons-poor-duct-airflow/

HVAC 101 - Reasons Why Duct Leaks Are Dangerous

Most of the time, homeowners are only aware of the problems in their HVAC system from the components that are visible. However, problems could also start from areas that are tucked away, just like the ductwork in your home. Leaks in the ductwork can lead to serious problems down the line if such issues are not detected sooner. Here are the reasons why HVAC duct leaks are dangerous and why you should hire an HVAC contractor.

An improperly working HVAC system could cost you a lot of money

Financial dangers – in general, your HVAC system can take up a huge chunk of your energy bill each year. With this in mind, you would easily get an idea of just how much energy the entire system takes up. When there are components of the system that are not working accordingly, the efficiency goes down. This then translates to increased energy costs. For instance, when there are leaks in the ductwork, some of the air that is supposed to lead to certain spaces would be redirected. This makes the system work harder than it normally would. Financially, this is a huge burden. Not to mention the reduced comfort that this would entail. It is one reason why professional HVAC repair in North Myrtle Beach is needed and is highly recommended. Health concerns – leaks in the ductwork don’t directly have any health impacts. However, the complications that come with the leaks are the ones that could potentially be damaging to one’s health. Basically, when hot and cold air meets, this creates condensation. This condensation then becomes a breeding ground for mold. Once the mold is given a place to proliferate, this then reduces the air quality which could be hazardous for the health of the inhabitants inside the home. What’s even more troublesome is the repair that needs to be done once the ducts that connect to the HVAC system has leaks. Problems with the system – when the leaks in the ducts go unnoticed for a long time, the HVAC system would have then exerted more effort to maintain the desired temperatures within the home. Basically, the system will be overworked and would be prone to problems. However, this could be averted if the leaks in the ductwork are detected right away. Also, it would be best if the leaks were repaired by a certified HVAC contractor. Why should you hire a professional HVAC contractor? Aside from having all the necessary training and experience for fixing problems with your system, an HVAC contractor would have all the equipment needed. Also, the contractor would be able to assess the situation and tell you just what caused the problem, the extent of the issue, the repairs needed, and how to prevent future problems. These are some reason why hiring a contractor is the best idea. When you encounter problems with your HVAC system, calling an HVAC contractor like NMB HVAC Pros is the better option than DIY repair.

Call NMB HVAC Pros if you need expert help in installing, repairing, or maintaining your HVAC unit.

NMB HVAC Pros North Myrtle Beach, SC, 29582 843-353-4089 http://nmbhvacpros.com

http://nmbhvacpros.com/hvac-duct-leaks-are-dangerous/